Our site uses cookies necessary for its proper functioning. To improve your experience, other cookies may be used: you can choose to disable them. This can be changed at any time via the Cookies link at the bottom of the page.


Pressure design of steel mesh reinforced plastic pipes [PE, Steel]

 

Plastic Pipes Conference Association # 2008 Budapest

Zhan jie wang

The plastic pipeline industry of China has been developing fast since 1980’s, as the result of the continual market demands from the construction, municipal engineering, agriculture, etc. China has become one of the major plastic pipe producing and application countries.

Please note that the whole article content is available on PPCA website only :

Related papers

2021 Amsterdam : APPLICATION OF PP-R COMPOSITE REINFORCED PIPES IN HOT AND COLD WATER SYSTEMS

Author(s) : Lei Wang, Guozhi Xu, Qiaoping Qiu, Weihua Lu, Yanwang Han

PP-R (random copolymerized polypropylene) has been widely used in hot and cold water systems. However, the standard PP-R pipes have the disadvantages of a large high-temperature thermal expansion coefficient, an insufficient notched impact strength, and a low temperature and pressure resistance. In this paper, a new...

2021 Amsterdam : THE DEVELOPMENT TREND OF CHINA’S PLASTIC PIPE INDUSTRY RESPONDING TO CHANGES IN THE ECONOMIC SITUATION

Author(s) : Zhanjie Wang, Yan Zhao, Melody Guo, Yanju Fan, Wei Tang

In the past ten years, China's plastic pipe industry has maintained a steady growth and made great progress in the upgrading of industrial structure, technological innovation, and improvement of quality levels. However, at the same time, in the face of the complex changes in the current economic situation, especially...

2018 Las-Vegas : China plastic pipe industry - Technical progress and quality improvement

Author(s) : Wang Zhanjie

As the largest production country, with numerous applications, China’s plastic pipe industry is developing steadily to meet the demand and needs. This paper analyzes the current situation and barriers, and proposes the breakthroughs to achieve a sustainable, stable and healthy development of China’s plastic pipe...

2018 Las-Vegas : Polyehthylene/aluminum/polyehthylene composite pipe for fuel gas application

Author(s) : Baiqian Li, Jun Wang, Lixian Zheng, Xiaoyi Peng, Lei Wang, Yu Cui, Guozhi Xu

Polyethylene/Aluminum/Polyethylene (PAP) composite pipe has the advantages of corrosion resistance, limited joints and convenient installation. Nowadays PAP pipes are widely used in indoor gas conveyance. But a number of companies encounter difficulties in installing gas meter in users’ house as well as billing. Some...

2018 Las-Vegas : The test method of metallic element for polyethylene plastic pipes or materials for pipes and its application

Author(s) : Xiaoying Lu, Yujie Wang, Qiang Huang, Chunyan Xu, Guangyu Zhu, Aimin Xiang, Linmei Wu, Yanfang Wang

The determination method of metal elements for polyethylene pipes was reported in this paper, the difference in metal elements content between raw materials and recycled materials was analyzed. The results showed that raw and recycled materials in polyethylene pipes were effectively distinguished via metal element...

2018 Las-Vegas : The use of temperature, lubrication, and supplied hydraulic pressure in the production of oriented PVC pipe

Author(s) : Jie Feng, Michael Petr, Jeff Wenzel, Mark Mirgon, Sam Crabtree, Alan Nakatani

Through tensile tests, simulated orientation, tribology, and finite element analysis, this study explored the effect of temperature, lubrication and applied hydraulic pressure in the PVC orientation process. It was demonstrated that tight control of these parameters is critical in a continuous PVC orientation process...

2016 Berlin : Advanced chemistry in PE polymerisation allow new possibilities for PE-RT type I resin

Author(s) : Alex Stolarz, Jian Wang

THE PE-RT TECHNOLOGY HAS EVOLVED SINCE IT HAS FIRST BEEN INVENTED 1982. AN ESTABLISHED TECHNOLOGY FOR HOT AND COLD SANITARY PIPES HAS POSITIONED ITSELF WELL WITHIN OTHER MATERIALS DUE TO THE EASY PROCESSING, HANDLING AND COST EFFICIENT PRODUCTION OF PIPES. RECENT TECHNOLOGY ALLOWS EVEN MORE FLEXIBLE RESINS TO BE...

2016 Berlin : Assessment of fusion degree of unplasticized poly (vinylchloride)(PVC-U) products using torque rheometer

Author(s) : Fu Zhimin, He Guoshan, Wang Wanjuan

Our research shows that in a torque rheometer test the greater the fusion degree of PVC-U is, the higher the minimum torque of the torque curve is, and the smaller the difference between the maximum torque and the minimum torque of the torque curve. According to the relationship, the method of evaluating the fusion...

2016 Berlin : Review of quality, application and development for PE pressure pipe in China

Author(s) : ZhanJie Wang, Cindy Wang

With the offers of whole value chain people, the application of PE pressure pipes has been increased widely in China since 1990’s, especially for gas pipes. Compounding PE material ensures the qualified pipes being used for infrastructure projects. There are some Innovation products from pipe producers to enlarge the...

2016 Berlin : The influence of beta-crystal content in PP-RCT materials and calculations of the test pressure of pipe

Author(s) : Tu Xiang-qun, Wang Chao, Cheng Zhong-lin, Dong Bo-bo

This paper is to verify the impact of different contents of nucleating agent and annealing processes on the content of β-crystal. By using four-parameter equation of PP-RCT with requirements in different application conditions, different temperature coefficients and Miner's rules the design stress of PP-RCT materials...

2014 Chicago : Design Study on Wall Thickness and Structure of Polyolefin Socket Fusion Fittings

Author(s) : Tu Xiangqun, Wang Chao

Two kinds of comprehensions about the wall thickness of socket fusion fittings from GB/T 28799.3- 2012 have been analyzed in this paper. Socket wall thickness relative to the different value of pipe series of fusion fittings was calculated respectively, and two kinds of simplified calculation have been suggested. The...

2014 Chicago : Meeting the Need for Stiffer Large Diameter Plastics Pipes in China

Author(s) : Wang Liqun, Wu Gengtian, Qi Jun

In China demand is growing rapidly for large diameter plastic pipes due to urbanization and the need to protect the environment with improved storm-water management systems. Whilst plastic pipes are already used in China for underground sewage and drainage applications the properties and processing limitations of the...

2014 Chicago : Steel Wire Reinforced Thermoplastics (PE) Composite Pipe Cross Sea Laying Technology

Author(s) : Tang Guoqiang, Wang Wei

This paper briefly introduces the characteristics of steel wire reinforced thermoplastics (PE) composite pipe structure, domestic and foreign sea crossing pipeline laying method, methods and their advantages and disadvantages, welding installation of steel wire reinforced thermoplastics (PE) composite pipe laying...

2014 Chicago : The Current Situation of China Plastic Pipe Industry and Market Opportunities for Further Economic Development in the Future

Author(s) : Wang Zhanjie, Zhao Yan, Melody Guo

In recent years, the Chinese plastic pipe industry has maintained a high growth rate and in 2012 the production of plastic pipe in China amounted to over 11 million tons. This not only provides important benefits due to the outstanding performance of plastic pipe, such as corrosion resistance, smooth wall, easy...

2014 Chicago : The Influence of Additive Levels on PE-Xa Pipe Performance

Author(s) : Zhang SiLiang, Zhang ShuangQuan, Guo XiaoLing, Ren YunHong, Wang MingKe

This article describes the effect of additive, light and high temperature on PE-X pipe’s performance. By additive amount changes, will be have different influence to pipe’s brittleness resistance, bending strength, and aging resistance. As cross-linking agent’s content increasing, bending strength enhanced, but...

2012 Barcelona : Industrial Application of PE pipes and Production Quality Control

Author(s) : Wang Zhiwei

In recent years, considerable progress has been made in the quality of PE pipe materials and products. PE pipes have been widely used in the water and gas distribution market sectors. Also thanks to the excellent performance and chemical resistance of these high quality PE pipes they have been used in other markets,...

2012 Barcelona : Introducing PP-HM Materials for Twin Wall Corrugated Pipes in China

Author(s) : Xu Yijiong, Liu lIangbing, Dongyu Fang, Cindy Wang, Jarmo Juhani Harjuntausta, Youssef Taha

Key words : Corrugated pipe, PP-HM, PE, sewage, drainage Whilst plastic pipes are already used in China for underground sewage and drainage applications the properties and processing limitations of the materials used are such that they are not able to fulfill all the requirements for large diameter or higher...

2012 Barcelona : The Research of New PP-R Welding Pipe Fittings

Author(s) : SHENG Zhong-yi, ZHENG Hong-jie , MAO Ming-zhong, ZHU Wei, XIE Song-gui

Pipe fittings is mainly used to connect, control and support the pipe system in the pipeline system, and welding pipe fittings mainly connect with pipe by the way of the hot-melt welding. The new welding pipe fittings, include the new shape of the pipe fittings, the column indications in the pipe wall and the concave...

2012 Barcelona : The status and the next five-year development outlook of the China plastic pipe industry

Author(s) : Wang Zhanjie

Since the late 1980’s the Chinese plastic pipe industry has maintained a high growth rate eventually becoming the largest producer of plastic pipe in the world. By 2010, the production of plastic pipe in China amounted to 8.4 million tons, with PVC, PE and PP pipe being the main products. Both the variety of pipe...

2012 Barcelona : The technical development of PVC-U pipe

Author(s) : Wang Zhanjie

With diversity and wide applications, the PVC-U pipe production is ranked first in China among all the plastic pipes, although in recent years, its growth rate is the slower than polyolefin pipes. This paper introduces and reviews the PVC-U pipe application in China, describes recent technical development, such as raw...

Members of the Association

BOREALISBOROUGEFormosa Plastics CorporationHanwha TotalEnergiesINEOS O&PIRPCKorea Petrochemical IND. Co., LTD (KPIC)LyondellBasellORLEN UnipetrolPetroChina Dushanzi Petrochemical CompanyPRIME POLYMERSABICSCG Chemicals & Thai PolyethyleneSinopecTASNEE