Papers
Plastic Pipes Conference Association # 2014 Chicago
Tang Guoqiang, Wang Wei
This paper briefly introduces the characteristics of steel wire reinforced thermoplastics (PE) composite pipe structure, domestic and foreign sea crossing pipeline laying method, methods and their advantages and disadvantages, welding installation of steel wire reinforced thermoplastics (PE) composite pipe laying across the sea. Pipe-laying ship technology across the sea in Dalian Changhai in water supply engineering vessel submarine pipeline, solve the problem of deep sea water supply engineering, provide a useful reference for similar complex sea sea water supply project.
Polyethylene pipe is used more often in the underwater pipeline laying material, because of its unique flexibility, float, scalability, integrity and non-disclosure, the connection characteristics of any length, in the water supply pipes, drain pipes underwater laying applications, the use of a huge prospect, has become the best choice for the underwater pipe laying. steel wire reinforced thermoplastics (PE) composite pipe (hereinafter referred to as SRTP pipe) is a new polyethylene composite pipe, which maintains all the advantages of polyethylene pipe, but also gives it a higher tensile strength and flexural strength, is more suitable for the complex sea conditions underwater pipe laying construction. SRTP pipe excellent performance, a single 50 m long pipe production delivery, safe and reliable fused melt plus double welding process, with the new pipelay vessel laying low cost method of construction, will promote its sewage in the deep sea, island water , desalination and other pressure piping system applications. In this paper, the construction techniques for deposition of ultra-long haul SRTP buried at sea pipeline elaborate, provide useful lessons for the future construction of offshore pipelines laying applications.
Related papers
Author(s) : Ajay Taraiya, Peter Degenhart, Mark Boerakker
In PPXX, a technology was presented for the first time that could bi-axially orient polyolefin pipes. With this technology, it is possible to prepare pipes that have a performance far beyond the standard ones. One approach to achieving this performance is via a continuous in-line process. To optimize the in-line...
Author(s) : Olivera Bilic, Vivek Rohatgi, Brody Peterson, David Hukill
Demand for conduit pipe is expected to surge globally due to rapid industrialization and urbanization in residential and commercial sectors. Just in the U.S., according to Market Research analysis, expected growth of the plastic conduit pipe market is at a CAGR of more than 5% over the next ten years. In response to...
Author(s) : Dolores Herran
MOLECOR continuing with its line of leading water infrastructure sector with its technological products, has recently developed a software that can be used through a mobile application or web browser with which users can digitalize and geolocate the different pieces that form a water infrastructure network. This is a...
Author(s) : Yi Zhong, Qianshi Ma, Haihua Yu
BSTRACT The residential district adopts central heating for low temperature radiators system. Due to the disrepair of the secondary heating pipe network that pipe from heat exchange station to user entrance, the running, leaking, dripping and leakage are serious, and the accidents occur frequently. The heat...
Author(s) : Amster Howard
This paper explores the use of a composite soil stiffness as a valuable design tool to consider when a pipeline traverses through poor soil conditions. Thermoplastic pipe are flexible pipe and require good soil support at the sides of the pipe to minimize deflection. However, sometimes the trench walls are weak soils...
Author(s) : Michael O’Rourke
The required wall thickness for a fully fused HDPE water main subject to an earthquake induced lateral spread is addressed in this paper. The water main is assumed to be buried via cut and cover (i.e., open cut with typical burial depths in the 2 to 15 feet range) procedures and any laterals have small diameters. For...
Author(s) : James F. Mason, Akshay Ponda, Hermann van Laak, Tobias Bauer
The long-term strength of unplasticized polyamide 12 (PA-U12) has been characterized using standard methods for plastic pressure pipe during the qualification process for use in buried piping systems for natural gas delivery operating at low ambient temperatures, usually less than 20 to 30°C at pressures...
Author(s) : Sunwoong Choi, Robert Stakenborghs , Pyeongan Lee, Byoungho Choi
This work developed a hydro-axial tension (HAT) test as a whole pipe axial tensile test and applied to evaluate the polyethylene (PE) pipe and fusion joints containing various flaws. HAT test was designed to utilize hydrostatic pressure to cause axial tension in pipes. The experimental and numerical analysis was...
Author(s) : Jacob John, Suresh Shenoy, Patrik Roseen
Cross-linked polyethylene (PEX) pipes continue to gain popularity in plumbing and indoor climate applications around the globe. This study focuses on increasing the sustainability of PEX pipes by utilizing recycled PEX and production waste streams into PEX production. Different methods available for recycling and the...
Author(s) : Aisha Khaleel, Suleyman Deveci, Sulistiyanto Nugroho, Fatima AlHameli
The use of polyethylene pipes in transportation networks of pressurized water and gas have shown superb performance over the history. High density, high-molecular-weight, and bi-modal polyethylene materials, known as PE80, PE100 and PE100RC, have successfully served the market for many years in standard applications....
Author(s) : Mitsuaki TOKIYOSHI, Yutaka SAWADA, Yasuhiko OTSUKI, Kensei INOUE, Takashi KURIYAMA, Toshinori KAWABATA
Polyethylene reinforced with short glass fibres (PE-sGF) pipe, manufactured by combining short fiber glass (sGF) with PE100 as a reinforcing material, has a higher pipe rigidity in the pipe circumferential direction than that of PE100 because of the reinforcing effect of the reinforcing material and a performance...
Author(s) : Kevin White, Shad Sargand
The current standard of practice for the installation of agricultural mains is in accordance with ASTM F449, Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control. ASTM F449 has several limitations. Currently, the allowable maximum height of...
Author(s) : Dr. Tania Weyland, Dr. Tobias Eltze, Dr. Rolf Wittlinger, Marie-Laure Bertet, Gregor Huber
A significant amount of water is lost in transit from the water treatment plant to the consumer. A major cause of water leakages is the deterioration of assets including the use of disinfectants. Using chlorine-based disinfectants is known to be extremely effective in eliminating waterborne pathogens, but they also...
Author(s) : Peter Sejersen, Ludo Debever
Microplastics in drinking water and in food in general has been a topic with ever increasing interest since a publication of a study in the British newspaper The Guardian. The microplastics topic has also high focus on governmental level, e.g. in Germany where a report of Fraunhofer Umsicht /1/ estimates the amount...
Author(s) : Chantz Denowh, Robert Stakenborghs, Liang Yu
The use of spoolable reinforced thermoplastic pipe (RTP) technologies in the onshore oil and gas industry has expanded significantly over the past decade. It is anticipated that interest will only continue to grow as oil and gas operators transition to transporting alternative fuels such as hydrogen and carbon...
Author(s) : Amster Howard
This paper focuses on the confusing plethora of choices that a design engineer in the United States faces when selecting installation instructions for buried pressure thermoplastic pipelines. For polyethylene pipe, the decision is between AWWA Manual M55, ASTM D2774, ASTM F1668, the PPI Handbook, MAB-3, PE Field...
Author(s) : Chris Greggs
Much has been done to improve the quality and efficiency of HDPE pipe installations over the years. Now, a totally new concept for fusion where the machine meets the pipe where it lays to improve worksite safety, boost jobsite efficiency, and minimize the amount of time spent between fusions has been developed. This...
Author(s) : Chris Ziu, Deanne Hughes, Steve Sandstrum
Plastic pipe is an environmentally responsible choice for a broad array of piping applications. The exceptional chemical/corrosion resistance, superior joining techniques and overall durability of these piping products have resulted in industry-leading life-cycle analyses (LCA’s) in the applications for which they...
Author(s) : Dr. Jan Hendrik Beckmann
For several decades now plastic pipes have been measured in-line [1]. However, currently used technologies also challenge the user in many ways, either by elaborate conversion work on the system for dimensional changes or by frequent calibration procedures [2] or in some cases the use of water as coupling medium [3]....
Author(s) : Norbert Jansen, Andrew Wedgner, Rainer Kloth
PE100+ Association(client) has sponsored a technical investigation to define the permeation rate of hydrogen through polyethylene pipes at an external expert laboratory. Four different types of PE pipe materials in the same pipe size and SDR17 have been evaluated at 3 different target temperatures 8°C, 14°C and 20°C,...
Members of the Association
