Past Success for Future Growth
Plastic Pipes Conference Association # 2004 Milan
Guldbaeck
The Danish Plastics Industry, represented by Uponor A/S, KWH Pipe AS and Nordisk Wavin A/S, has cooperated with Erling Holm, consultant, and DANVA (Danish Water and Waste Water Association) in the drafting of the above new technical guide ("Brug af plastrør til vand- og afløbssystemer, vejledning nr. 54" (1)) which was published in book form at the beginning of October 2003. A Danish version of this guide can be downloaded from Wavin's website www.wavin.dk. The guide is an applicable quality tool to system owners, consultants, producers, contractors, operational and maintenance staff which are all responsible parties in the efforts to ensure the required lifetime of 100 years . The guide deals with complete flexible plastic pipe systems for water supply and sewer systems – systems that form an essential part of the infrastructure of a modern society. Generally, the guide focuses on lifetime, quality, environment and economy, thereby involving all the people responsible for the final result : politicians, local governments, consultants/designers, producers, contractors , operational staff etc. The guide has been divided into a general introduction and four main themes, production, design, installation, operation.
Related papers
Author(s) : Donald Swen, Leanne Pichay, Nicholas Vallin, Alice Wu, Jim Johnston
In the rural commune of Ait Bayoud, Morocco, two of the most remote villages in the area, Ilguiloda and Izgouaren, live with water scarcity. To meet their water needs, women and children walk several kilometers to the nearest spring each day, often multiple times a day. Consequently, children cannot attend school...
Author(s) : Andreas Moerman, Flip van der Valk, Mirjam Blokker KWR, Tjakko Haaijer, Jan Vreeburg,
Drinking water companies with ageing networks are facing vast amounts of drinking water network reconstructions during the coming decades. This development coincides with the energy transition, which puts pressure on the available space underground. These external drivers give drinking water companies an opportunity...
Author(s) : Paul J. Freudenthaler, Joerg Fischer, Mathias Eder, Reinhold W. Lang
For controlled water disinfection, typically chlorine is used and preliminary studies demonstrate its aging and crack growth acceleration effects on polyolefin pipe materials [1, 2]. Although the use of recycled plastics is not prohibited in some ISO standards for polyolefin piping systems [3–5], only small amounts...
Author(s) : Greg Scoby, PE
This paper will detail the steps taken during adoption of HDPE for potable water systems improvements including material justification, creation of related specifications, investigation of available piping components, qualification of contractors and the construction/inspection of related systems. The City of...
Author(s) : Christian Schalich
Plastic pipes for infrastructure and building applications are precisely specified with regards to wall thickness and diameter. Pipe manufacturers use different measuring methods in order to ensure the required dimensional accuracy and maintain a constant high quality. This paper introduces a measuring system based on...
Author(s) : Eng. Grigorios Vigellis, Eng. Mohamed Hageb
Continuous development and innovation in the production of plastic pipes made by high density polyethylene (HDPE) has enabled the industry to produce much larger diameter systems than ever believed possible. The enablers for production of such large plastic pipes are three main pillars: continuous innovation...
Author(s) : Jennifer Ravereau, Jose Teixeira Pinto, Malena Bernabeu, Jose Alacid, Jean-Philippe Le Goff, Frederic Mohier, Benjamin Rabaud
Drinking water network fittings such as valves are made of brass materials known to be robust over long periods. Due to the gradual inflation metallic raw material costs, composite plastic valves have grown in market share. Uncertainties remain, however, on their long-term reliability. The aim of this work is to...
Author(s) : C. Losher and P.V. Mercea
In the framework of the German Environmental Agency (UBA) requirements of plastic articles in contact with drinking water (KTW-BWGL-guideline), the compliance is verified by comparing so-called “expected concentrations at tap”, C tap , of substances contained in the plastics with specific limits in drinking water...
Author(s) : Alex Stolarz, Klaus Grønnegaard Lauridsen
Low temperature District Heating – COOL DH – addresses the challenges of the upcoming decades in the energy sector for new housing developments. Energy efficiency is an important aspect of modern building construction. Improved building insulation and other technologies result in lower heat demand and enable new...
Author(s) : Ulrich Schulte, Dr. -Ing. Joachim Hessel
In order to protect the Austrian lakes effectively against the discharge of effluent, a 13 km long pressure pipeline made of high density polyethylene was laid on the bottom of Lake Ossiach back in 1971. The DN355 to DN200 pipes were produced from a first generation HDPE-compound. The classification would have been...
Author(s) : Argnani Claudio, Ing. Gianpaolo Contarini
...Clogging of the pipes can be experienced in sewer systems after a short period of service, due to the intrusion of roots from plants and trees. Plants, and in particular their roots, are attracted by the water flowing inside the pipes. These roots will strain the connections between pipes, in particular the sockets...
Author(s) : Xinwen Yu, Aimin Xiang, Dongyu Fang, Peck Tze Kang, Jinghui Li
The Chinese PE water pipe market has developed significantly in recent years and particularly over the last 12 months. Against a background of water scarcity and growing urbanization, this evolving market has grown significantly in both size and quality awareness. On the back of past experiences, a fundamental...
Author(s) : Dr Ruediger Liske, Dr Tobias Eltze, Dr Tania Weyland, Marie-Laure Bertet
The migration of NIAS (Non-Intentionally Added Substances) into potable water is a recurring topic for the distribution of cold and warm drinking water and related materialsindustry. These substances are chemical compounds that are present in drinking water contact materials but have not been added during the...
Author(s) : Zhanjie Wang, Yan Zhao, Melody Guo, Yanju Fan, Wei Tang
In the past ten years, China's plastic pipe industry has maintained a steady growth and made great progress in the upgrading of industrial structure, technological innovation, and improvement of quality levels. However, at the same time, in the face of the complex changes in the current economic situation, especially...
Author(s) : Steven Folkman
A recent survey again confirms that PVC pipe has the lowest break rate when compared with break rates of ductile and cast iron, asbestos cement, steel, and concrete pipe. Other results of interest to water utilities and engineers are discussed. During 2017, Utah State University conducted a survey of utilities across...
Author(s) : Wang Zhanjie
As the largest production country, with numerous applications, China’s plastic pipe industry is developing steadily to meet the demand and needs. This paper analyzes the current situation and barriers, and proposes the breakthroughs to achieve a sustainable, stable and healthy development of China’s plastic pipe...
Author(s) : Liang Yu, Akshay Ponda, Dane Chang
Following the development of US shale oil and gas production since 2007, the demand for thermoplastic pipes with better corrosion resistance, and lower installation and operation cost than carbon steel pipe, has been growing significantly. Nylon 12 has been qualified for hydrocarbon transportation in offshore...
Author(s) : HU Fa, LI Yue, GAO Yuanjie, ZHE Dongmei, WEI Ruoqi
This paper expounds the development status of composite insulating pipe in the heating and chemical fields from the aspects of materials, structure and application. Combined with the relevant standards and technical requirements, the performance advantages and the key evaluation methods such as axial shear strength,...
Author(s) : Davidovski Zoran
To get a deeper insight in why plastic pipes systems in some cases are deselected by designers, installers and users, European Plastics Pipes and Fittings Association (TEPPFA) initiated a research including interviews in four pilot countries: Poland, France, Germany and the UK. The first phase was concentrating on...
Author(s) : Joerg Fischer, Paul J. Freudenthaler, Patrick R. Bradler, Reinhold W. Lang, Susan C. Mantell
This research addresses the effect of nucleation on the global aging behavior and the fatigue crack growth (FCG) resistance of commercial alpha- and beta-nucleated polypropylene random copolymer pipe grades (PP-R) when exposed to chlorinated water (5 mg/l free chlorine) at an elevated temperature of 60°C. Comparing...
Members of the Association
