Plastic Pipes Conference Association # 2023 Lake Buena Vista
Dr. Ricky Selle
Structural behavior of flexible plastic manholes is very different from rigid concrete products. Although this is state-of-the-art knowledge, no international or EN standard exists on structural design of these products. Therefore, traditional soil models and soil pressure coefficients are usually applied if calculations for design checks are required. These models are based on rigid wall structures and pipe design methods and do not adequately account for the flexibility and soil interaction of the manholes in the subsurface 3D-space. Recently a working group was established in Germany to develop a design standard for concrete and plastic manholes. In order to calibrate the design equations for the flexible manholes on experimental data and field experience, an extensive in-situ testing of a PP manhole (DN 1000) in a sandbox was conducted. The comparison of deflection readings and calculation result reveals a great difference. Evidently, the assumption of horizontal soil pressure on plastic manholes is wrong. Only soil pressure coefficients of less than 0.1 give realistic results. This is significantly less than the coefficient for active soil pressure, which is widely used today
Related papers
Author(s) : Ton Schoenmaker
For years the way of producing a flow profile for Inspection Chambers and Manholes could be divided into 3 methods: Injection moulding, Roto moulding and Hand assembling. For the standard orientations, for example straight through and cross, the IM profile integrated with a base is by far the best option. But for...
Author(s) : James F. Mason, Akshay Ponda, Hermann van Laak, Tobias Bauer
The long-term strength of unplasticized polyamide 12 (PA-U12) has been characterized using standard methods for plastic pressure pipe during the qualification process for use in buried piping systems for natural gas delivery operating at low ambient temperatures, usually less than 20 to 30°C at pressures...
Author(s) : Aisha Khaleel, Suleyman Deveci, Sulistiyanto Nugroho, Fatima AlHameli
The use of polyethylene pipes in transportation networks of pressurized water and gas have shown superb performance over the history. High density, high-molecular-weight, and bi-modal polyethylene materials, known as PE80, PE100 and PE100RC, have successfully served the market for many years in standard applications....
Author(s) : Jiyong Park, JaeHyuck Han, YoungGu Kim, Eunjin Park
This study investigates the influence of various parameters on polymer design to determine the slow crack growth. HDPE(High Density Polyethylene) materials with different molecular weight distribution and comonomer content for PE100-RC pipe were investigated with cracked round bar test. The cracked round bar test...
Author(s) : Cindy Bray
For over two decades, the plastics pipe industry in Australia has aimed to recycle the maximum amount of usable plastic pipe and other suitable materials into new plastic pipes through programs such as take-back schemes and providing collection facilities on manufacturing sites. In Australia long-term sustainability...
Author(s) : Zhanjie Wang, Jing Guo, Lin Wang
In the past two years, the Chinese plastic pipe industry has faced a complex and changeable development situation. The domestic economy has faced the pressure of demand shrinkage, supply impact, and expected weakness, and the market has changed greatly. The impact of the Covid-19 and the influence of many unfavorable...
Author(s) : Márton Bredács, Jutta Geier, Mario Messiha, Gernot Oreski, Gerald Koinig, Raphael Horvath, Szilveszter Gergely, Gerald Pinter
In 2020, the global plastics production was 367 million tons. In Europe 20 % was used in the building and construction sector to manufacture in significant proportion polyethylene (PE) and polypropylene (PP) pipes [1]. To increase the current 30 % recycling rate, it is crucial to improve the quality of recyclates and...
Author(s) : Chris Greggs
Much has been done to improve the quality and efficiency of HDPE pipe installations over the years. Now, a totally new concept for fusion where the machine meets the pipe where it lays to improve worksite safety, boost jobsite efficiency, and minimize the amount of time spent between fusions has been developed. This...
Author(s) : Jay Parvez, Richard Nichols
All thermoplastic and thermoset pipes must consider the impacts of cyclic loading on overall performance. Since its first use, PVC pipes have been tested for its resilience to such loading. As testing evolved over time, the method to determine cyclic capacity for gasketed PVC pipes has improved. Previously, the...
Author(s) : Peter Youssef, Sultan Alkendi, Hussein Basha
Bahr El-Baqar Water Treatment Plant, produces 2 billion m3 per year, introduces a sustainable solution for environmental pollution recovery and irrigation water source (via recycling the water of Bahr El- Baqar drain); whereas it protects the environment and generates water to support the cultivation of 4000 km2 in...
Author(s) : J. Lahoz
An investigation project was launched in 2020 to clarify the relationships between the processing conditions and the design lifetime of PVC-U 250 pipes. Ca/Zn stabilized pressure pipes were extruded with different processing temperatures and characterized by their DSC B-onset temperature and degree of gelation. Their...
Author(s) : Suleyman Deveci, Aisha Khaleel, Birkan Eryigit
Short and long term hydrostatic pressure resistance of plastic pipes are measured according to ISO 1167, by applying an internal pressure that is calculated for the target hoop stress considering outer diameter and wall thickness of the pipe samples. Due to the nature of the extrusion process, wall thickness...
Author(s) : Ludo Debever, Peter Sejersen
The Circular Economy Action Plan is a major building block of Europe’s Green Deal, the European Climate Change strategy. It has far-reaching consequences for the entire EU industrial fabric and its business models. The EU’s transition from a linear to a circular economy aims to reduce on natural resources and pave...
Author(s) : Steven L. Barfuss
In 2022, USU completed the most comprehensive water main break survey ever undertaken in North America to determine the performance of different pipe materials. More than 800 utilities responded to the survey. The survey respondents from this study represent 410,000 miles or 16.7% out of an estimated 2.45 million...
Author(s) : Guido Quesada
Spigot bevels (also referred to as chamfers) for plastic pipe joints using elastomeric seals are well-known and often prescribed in standards such as ISO 1452 for PVC-U and 16422 for PVC-O. The most common type of bevel is a simple straight cut at a 15° angle with respect to the pipe axis, leaving approximately 50%...
Author(s) : Riwu Yao, Fengyao Ni, Jinkui Wu, Zhiyong Kong, Jianfeng Shi , Jinyang Zheng
Plastic pipelines have been widely used in various industries, such as gas and oil transmission and nuclear power plants. The safe operation of pipelines is a critical concern in applications, and structural health monitoring methods of plastic pipelines are attracting broad interest in both industry and academia. In...
Author(s) : Guido Quesada, Mark Weih
The Plastic Retainer Ring (PRR) gasket is an old friend of pipe joints, and it is still used among other sealing solutions developed more recently. With origins traced back to the end of the 1960s, it is recognized among the first solutions developed for gasketed plastic pipe joints. It is very likely to have...
Author(s) : Dipl. Ing. Rainer Vießmann
The production of PVC pipes is mainly produced on counter rotating twin screw extruders as the PVC Dryblend material is readily available in powder form. Whereas PVC granules, mainly processed on single screw extruders, play a minor role in pipe production for economic reasons. The design of the extruder screws has a...
Author(s) : Andreas Moerman, Flip van der Valk, Mirjam Blokker KWR, Tjakko Haaijer, Jan Vreeburg,
Drinking water companies with ageing networks are facing vast amounts of drinking water network reconstructions during the coming decades. This development coincides with the energy transition, which puts pressure on the available space underground. These external drivers give drinking water companies an opportunity...
Author(s) : Joe Babcanec, P.E., Dan Currence, P.E.
The newly released Drainage Handbook provides complete guidance on corrugated polyolefin pipe. Perhaps the biggest contribution this new handbook makes to the advancement of both HDPE and PP corrugated plastic pipe is the design procedure presented. The design procedure reflects the industry’s recommended practice...
Members of the Association
