Our site uses cookies necessary for its proper functioning. To improve your experience, other cookies may be used: you can choose to disable them. This can be changed at any time via the Cookies link at the bottom of the page.


LARGE DIAMETER & THICK WALL HDPE PIPES PRODUCED AND DEVELOPED IN THE MIDDLE EAST – 3 CASE STORIES

 

Plastic Pipes Conference Association # 2021 Amsterdam

Eng. Grigorios Vigellis, Eng. Mohamed Hageb

Continuous development and innovation in the production of plastic pipes made by high density polyethylene (HDPE) has enabled the industry to produce much larger diameter systems than ever believed possible. The enablers for production of such large plastic pipes are three main pillars: continuous innovation of plastic piping raw materials with improved properties, advances in extruders and other equipment developments as well as value- added engineering. This has meant that plastic pipes have become the piping of choice for usage in industrial, municipal and infrastructure works, such as water distribution and transmission, storm water management and sewage.

Especially in the Middle East governments and industries have continued to invest, knowing that low labour costs and low feedstock and material costs, would ensure that they remained competitive. Also, many large water and wastewater projects have been continued for the desalination of sea water, wastewater treatment or water recycling, to provide improved water and sanitation for the growing population. All these projects require large diameter pipes and in many of these countries they have had the confidence to break with tradition and choose thermoplastic pipe materials rather than the conventional ones: such as steel, ductile iron or concrete.

Related keywords : LARGE DIAMETER HDPE, THICK WALL HDPE, HYDROELECTRIC, RECYCLED SEA WATER, SEWAGE.
Please note that the whole article content is available on PPCA website only :

Related papers

2021 Amsterdam : A TRADE ASSOCIATION EXPLORED

Author(s) : Drew Mueller, Peter Dyke

HDPE Pipe holds a dominant position in several markets in North America: natural gas distribution, oil patch, mining, landfill and geothermal. So why are polyethylene’s municipal water and wastewater market shares so much lower than these other industries? How has the polyethylene industry been successful in growing...

2021 Amsterdam : APPLICATIONS OF HDPE PIPING TO SUPPLY WATER TO RURAL VILLAGES IN MOROCCO

Author(s) : Donald Swen, Leanne Pichay, Nicholas Vallin, Alice Wu, Jim Johnston

In the rural commune of Ait Bayoud, Morocco, two of the most remote villages in the area, Ilguiloda and Izgouaren, live with water scarcity. To meet their water needs, women and children walk several kilometers to the nearest spring each day, often multiple times a day. Consequently, children cannot attend school...

2021 Amsterdam : CHALLENGING THE 10% WALL THICKNESS RULE FOR HDPE MARINE PIPELINES

Author(s) : Ilija Radeljic, Ebbe Smith

HDPE pipe can be relatively easily scratched during the manipulation on the site, which is especially true for the marine pipelines. Installing the scratched marine pipe with the S bend method presents a risk and repair methods are usually performed. Currently, there is no standard defining the repair procedure, in...

2021 Amsterdam : CHEAPER AND BETTER NETWORKS REALISED WITH PRACTICAL DESIGN SOFTWARE

Author(s) : Andreas Moerman, Flip van der Valk, Mirjam Blokker KWR, Tjakko Haaijer, Jan Vreeburg,

Drinking water companies with ageing networks are facing vast amounts of drinking water network reconstructions during the coming decades. This development coincides with the energy transition, which puts pressure on the available space underground. These external drivers give drinking water companies an opportunity...

2021 Amsterdam : CONCEPT TO STANDARD – HOW RECYCLED MATERIAL WAS EFFECTIVELY ADDED TO U.S. STANDARDS FOR CORRUGATED HDPE PIPE

Author(s) : Daniel Currence, Michael Plumier

Over a ten-year period, the North American corrugated plastic pipe industry successfully demonstrated that post-consumer and post-industrial recycled materials could be responsibly incorporated into corrugated pipes used for drainage applications. Prior to this work, the material standards were established for ...

2021 Amsterdam : DESIGN BUILD OF A 54” REDUNDANT FORCE MAIN UTILIZING HORIZONTAL DIRECTIONAL DRILLING

Author(s) : Bruce Mowry, PhD, P.E., Brian Dorwart, P.G., P.E., David Mancini, Bryan Fletcher, Roger Williams, P.E., Rene Brito, EIT, Arnelio Alfonso, P.E .

The City of Miami Beach owns and operates a 54-inch sanitary sewage PCCP force main (FM) that was built in 1977. This FM is the only transmission pipeline for conveying about 22 million gallons per day (MGD) of raw sewage to the wastewater treatment plant. In 2012, the City identified structural deficiencies in the...

2021 Amsterdam : DEVELOPMENT OF A RAPID AND INNOVATIVE IN-FACTORY PROCEDURE FOR TESTING THE PERFORMANCES OF PE PIPES CONTAINING VARIOUS PROPORTIONS OF RECYCLED POLYMER MATERIAL

Author(s) : Dominique GUEUGNAUT, Pascal AUSSANT, Romuald BOUAFFRE, Myriam BECHROURI

Concerns regarding the environment and sustainable development have revived interest in the reprocessing and re-use of polymer materials from manufactured objects that have reached the end of their operating life. Within this framework, formal professional agreements have been put in place at global level under the...

2021 Amsterdam : DEVELOPMENTS IN NORTH AMERICAN CONDUIT PRACTICES

Author(s) : Tom Stewart, Richard Hicks, Patrick Vibien, Lance MacNevin

Arguably, broadband technologies have become as vital to society as water delivery, waste removal and energy distribution. However, the role of plastic conduit in broadband is often overlooked within the piping industry and society in general. HDPE conduit is an essential component to the build -out of 5G cell...

2021 Amsterdam : DRAINAGE HANDBOOK STRUCTURAL DESIGN PROCEDURE FOR CORRUGATED POLYOLEFIN PIPE

Author(s) : Joe Babcanec, P.E., Dan Currence, P.E.

The newly released Drainage Handbook provides complete guidance on corrugated polyolefin pipe. Perhaps the biggest contribution this new handbook makes to the advancement of both HDPE and PP corrugated plastic pipe is the design procedure presented. The design procedure reflects the industry’s recommended practice...

2021 Amsterdam : EFFECT OF CHLORINATED WATER ON THE FATIGUE CRACK GROWTH RESISTANCE OF POLYETHYLENE COMPOUNDS WITH RECYCLATE CONTENT FOR PIPE APPLICATIONS

Author(s) : Paul J. Freudenthaler, Joerg Fischer, Mathias Eder, Reinhold W. Lang

For controlled water disinfection, typically chlorine is used and preliminary studies demonstrate its aging and crack growth acceleration effects on polyolefin pipe materials [1, 2]. Although the use of recycled plastics is not prohibited in some ISO standards for polyolefin piping systems [3–5], only small amounts...

2021 Amsterdam : HIGH THICKNESS AND LARGE DIAMETER PIPES MANUFACTURING WITH INNOVATIVE EXTRA LOW SAG PE100 IN MIDDLE EAST AND INDIA

Author(s) : Prashant Nikhade, Farraj Tashman

In the Middle East and India, PE pipes have expanded their applications in a big way for water supply, industrial effluents, corrosive chemical transportation, slurry transportation, city gas distribution networks and agriculture irrigation purposes over ductile iron, cast iron and other conventional pipes. PE...

2021 Amsterdam : HISTORY OF HDPE USE AT THE CITY OF PALO ALTO FOR POTABLE WATER DISTRIBUTION

Author(s) : Greg Scoby, PE

This paper will detail the steps taken during adoption of HDPE for potable water systems improvements including material justification, creation of related specifications, investigation of available piping components, qualification of contractors and the construction/inspection of related systems. The City of...

2021 Amsterdam : INTAKE AND DISCHARGE LARGE DIAMETER PIPELINE PROJECT FOR COAL FIRED GENERATION PLANT IN JAPAN

Author(s) : Mitsuaki Tokiyoshi, Yuichi Shibao, Yoshitaka Watanabe, Takeshi Yoshioka, Takashi Oka, Kohei Sasaki

It was common to use those pipelines for Steel in Japan. However Steel pipes have the long standing problems that it has been needed maintenance costs for rust prevention and antifouling property. Therefore it had been carried out the project that large diameter polyethylene pipeline applied for circulating water...

2021 Amsterdam : LONG-TERM DURABILITY OF NEW POLYMER COMPOSITE VALVES FOR DRINKING WATER NETWORKS

Author(s) : Jennifer Ravereau, Jose Teixeira Pinto, Malena Bernabeu, Jose Alacid, Jean-Philippe Le Goff, Frederic Mohier, Benjamin Rabaud

Drinking water network fittings such as valves are made of brass materials known to be robust over long periods. Due to the gradual inflation metallic raw material costs, composite plastic valves have grown in market share. Uncertainties remain, however, on their long-term reliability. The aim of this work is to...

2021 Amsterdam : MODELLING THE MIGRATION FROM PVC-U PIPES INTO DRINKING WATER

Author(s) : C. Losher and P.V. Mercea

In the framework of the German Environmental Agency (UBA) requirements of plastic articles in contact with drinking water (KTW-BWGL-guideline), the compliance is verified by comparing so-called “expected concentrations at tap”, C tap , of substances contained in the plastics with specific limits in drinking water...

2021 Amsterdam : MULTILAYER POLYMER PIPES – THE INFLUENCE OF RESIDUAL STRESS ON FATIGUE LIFETIME

Author(s) : Lukas Travnicek, Pavel Hutar, Jan Poduska, Andreas Frank, Florian Arbeiter, Jaroslav Kucera, Jiri Sadilek, Gerald Pinter, Lubos Nahlik

The application of recycled material in pressure piping systems has been considered lately – it was suggested, that the recycled polyethylene could be used as a part of a multilayer pipe together with virgin material. This type of pressure pipes is not availableon the market yet, so their properties can be only...

2021 Amsterdam : NEW CHALLENGING APPLICATION AS USED PEAT LAND HIGH PERFORMANCE PE-SGF PIPELINE SYSTEM FOR INTERNAL PRESSURE APPLICATION AS LARGE DIAMETER

Author(s) : Kensei INOUE, Mitsuaki TOKIYOSHI, Joji HINOBAYASHI, Takeshi KARINO, Toshinori KAWABATA, Takashi KURIYAMA

As the worldwide problems are over-population, unusual weather like as localized heavy rain and climate change. Against those problem, it has to need new projects to make a new agricultural field, drainage pipeline system and to spread the new underground irrigation system at peat land whereas spots of about 2 million...

2021 Amsterdam : POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) IN LOW TEMPERATURE DISTRICT HEATING SYSTEMS

Author(s) : Alex Stolarz, Klaus Grønnegaard Lauridsen

Low temperature District Heating – COOL DH – addresses the challenges of the upcoming decades in the energy sector for new housing developments. Energy efficiency is an important aspect of modern building construction. Improved building insulation and other technologies result in lower heat demand and enable new...

2021 Amsterdam : PRESSURE PIPELINE MADE OF HDPE – DETERMINATION OF REMAINING LIFETIME AFTER 47 YEARS OF OPERATION IN LAKE OSSIACH (CARINTHIA, AUSTRIA)

Author(s) : Ulrich Schulte, Dr. -Ing. Joachim Hessel

In order to protect the Austrian lakes effectively against the discharge of effluent, a 13 km long pressure pipeline made of high density polyethylene was laid on the bottom of Lake Ossiach back in 1971. The DN355 to DN200 pipes were produced from a first generation HDPE-compound. The classification would have been...

2021 Amsterdam : PVC-O DN800: EFFICIENT TRANSFORMATION FROM SOIL TO IRRIGATED LAND

Author(s) : Ignacio Muñoz

“Food is the new oil and gas” is a rather bold statement, but everyday more and more people are concerned about food scarcity. Bringing irrigation to not productive lands will change the lives of the community and if it can be done with a cost effective and the most ecofriendly solution, even better. This case study...

Members of the Association

BOREALISBOROUGEFormosa Plastics CorporationHanwha TotalEnergiesINEOS O&PIRPCKorea Petrochemical IND. Co., LTD (KPIC)LyondellBasellORLEN UnipetrolPetroChina Dushanzi Petrochemical CompanyPRIME POLYMERSABICSCG Chemicals & Thai PolyethyleneSinopecTASNEE