Plastic Pipes Conference Association # 2023 Lake Buena Vista
Ignacio Muñoz
Society has recently lived few strange and peculiar years, to say the least. COVID impacted personal lives, businesses, industries. And it is undeniable, the big elephant in the room arrived years before COVID and will remain much more: CLIMATE CHANGE. As broad as this topic is, this paper focuses on the impact that it has on pipe industry from the point of view of sustainability. R&D in industries drives the change into society, and that reflects into its purpose: “To improve the quality of life for people everywhere in the world, bringing affordable water within their reach through innovative, efficient and sustainable solutions”.
Thanks to an orientation technology allowing for a unique, air based, automatic and very stable system, it has been possible to enlarge the range from DN400 mm (16”) in year 2006, to DN1200 mm (48”) nowadays. This technology opens up possibilities for plastic pipes of large diameters used at high pressures (25 bar or 305 psi depending on the geography considered).
Related papers
Author(s) : Xin Zhou, Abdullah Saber, Shuqiang Wang, Huilong Chen
PE-RT II (PE100 classification) is designed >50 years lifespan at elevated temperature which aims to the growing demands on the applications of hot water and other industrial applications. District heating is a growing market in Greater China. However, the conventional pipes have serious corrosion issue in this...
Author(s) : Dolores Herran
MOLECOR continuing with its line of leading water infrastructure sector with its technological products, has recently developed a software that can be used through a mobile application or web browser with which users can digitalize and geolocate the different pieces that form a water infrastructure network. This is a...
Author(s) : Ricardo Pascual
Social awareness with aspects related to the conservation of the environment and sustainability, the acceptance by citizens of the need to reduce consumption, reuse products, repair as far as possible and, fundamentally, the action of recycling at the end of its life, facilitates the availability of recycled plastics...
Author(s) : Shane Harton, Andrew Sell, Carl Dolgow
The torque rheometer has been the standard instrument used in poly(vinyl chloride) (PVC) quality control (QC) testing for decades. ASTM D2538 has provided standard, comprehensive testing and analysis procedures since 1969 that have allowed the vinyl industry to coalesce around this simple, yet robust, set of...
Author(s) : Anders Andtbacka, Peter Sejersen
In March 1999, a project report on the performance of buried Thermoplastics pipes was published by TEPPFA /1/. In the report, deflection and strain data on buried pipes were analyzed and compared with calculation results from several well-known static calculation models in use in Europe. Pipes were installed to...
Author(s) : Antonio Rodolfo Jr., Vanderley M. John
Unplasticized (U-PVC) ABNT NBR 5647-2 regular industrial pipe samples, with nominal diameter DN 100, outside diameter 110 mm, nominal wall thickness 7.8 mm, Ca/Zn stabilized, were studied using an essential work of fracture (EWF) approach. These pipe samples were also tested for the degree of gelation via...
Author(s) : Cindy Bray
For over two decades, the plastics pipe industry in Australia has aimed to recycle the maximum amount of usable plastic pipe and other suitable materials into new plastic pipes through programs such as take-back schemes and providing collection facilities on manufacturing sites. In Australia long-term sustainability...
Author(s) : Tobias Johnsen, Ole Grøndahl Hansen
With a growing global population that will primarily settle in urban areas, more and more agricultural land will be converted into dwellings, roads etc. As the demand for food in 2050 will be 60% greater than today, a conflict between Sustainable Development Goals 2 (Zero Hunger) and 11 (Sustainable Cities and...
Author(s) : Zhanjie Wang, Jing Guo, Lin Wang
In the past two years, the Chinese plastic pipe industry has faced a complex and changeable development situation. The domestic economy has faced the pressure of demand shrinkage, supply impact, and expected weakness, and the market has changed greatly. The impact of the Covid-19 and the influence of many unfavorable...
Author(s) : Dr. Tania Weyland, Dr. Tobias Eltze, Dr. Rolf Wittlinger, Marie-Laure Bertet, Gregor Huber
A significant amount of water is lost in transit from the water treatment plant to the consumer. A major cause of water leakages is the deterioration of assets including the use of disinfectants. Using chlorine-based disinfectants is known to be extremely effective in eliminating waterborne pathogens, but they also...
Author(s) : Roland Valk, René Hermkens, Sjoerd Jansma
The use of hydrogen gas as an energy carrier is seen as a key component of the energy transition. This creates new challenges, including in relation to the transport and distribution of this gas. The low-pressure (natural) gas distribution grid in the Netherlands currently consists of 64% PVC and is presumed to be...
Author(s) : Nayib Joussef, Chris Zenthoefer, Sergio Vaccaro
Butt fusion of HDPE pipe has long been shown to be an extremely beneficial process in producing leak-free, monolithic piping systems. Continued growth of the Chilean mining sector has necessitated a substantial increase in polyethylene pipe sizes and wall thicknesses, with diameters well beyond 630 mm up to 2m...
Author(s) : A. Marangoni
The competitiveness of plastic pipes vs. non plastic pipes for water and sewer networks relies on both a superior performance to cost ratio and environmental benefits that can be offered to the utility industry, across the whole lifecycle of these networks. In order to help the European pipe network owners in...
Author(s) : Tobias Johnsen
To ensure the highest possible quality of plastic pipes for the Nordic market, the Nordic Poly Mark currently only allows virgin material or own reprocessed material. In order to accelerate the circular plastic pipe economy in the Nordics, a partnership between a PVC pipe waste collection system, a PVC pipe producer...
Author(s) : Jay Parvez, Richard Nichols
All thermoplastic and thermoset pipes must consider the impacts of cyclic loading on overall performance. Since its first use, PVC pipes have been tested for its resilience to such loading. As testing evolved over time, the method to determine cyclic capacity for gasketed PVC pipes has improved. Previously, the...
Author(s) : Michael Pluimer, PhD, Joseph Babcanec, PE
While corrugated HDPE pipes are still the dominant plastic pipe product in the United States for culvert and storm sewer applications, Corrugated polypropylene pipes have continued to gain market share over the past decade. There are currently several different ASTM and AASHTO standards for these products, including...
Author(s) : Karin Jacobson, Daniel Ejdeholm
Plastic pipes often have much better corrosion resistance than metallic pipes and have, in addition, the benefits of low weight and flexibility. Thanks to this, they are often used to convey chemicals. There is, however, still a large potential for a much more extensive use of plastic pipes for this application. The...
Author(s) : J. Lahoz
An investigation project was launched in 2020 to clarify the relationships between the processing conditions and the design lifetime of PVC-U 250 pipes. Ca/Zn stabilized pressure pipes were extruded with different processing temperatures and characterized by their DSC B-onset temperature and degree of gelation. Their...
Author(s) : Guido Quesada, Mark Weih
The Plastic Retainer Ring (PRR) gasket is an old friend of pipe joints, and it is still used among other sealing solutions developed more recently. With origins traced back to the end of the 1960s, it is recognized among the first solutions developed for gasketed plastic pipe joints. It is very likely to have...
Author(s) : Luciana Oriqui, Mauro Adamo Seabra, Antonio Rodolfo Jr.
The Brazilian PVC pipe industry maintains specific mechanisms of intense and continuous evaluation of the products regularly offered to the market. These programs are carried out by an independent third-party technical entity, within known public rules and based on the best practices of conformity assessment. Their...
Members of the Association
