CRITICAL QUALITY CONTROL OF POST CONSUMER RECYCLED PVC

Author(s) : Olivera Bilic, Vivek Rohatgi, Brody Peterson, David Hukill

Demand for conduit pipe is expected to surge globally due to rapid industrialization and urbanization in residential and commercial sectors. Just in the U.S., according to Market Research analysis, expected growth of the plastic conduit pipe market is at a CAGR of more than 5% over the next ten years. In response to...

Author(s) : Ricardo Pascual

Social awareness with aspects related to the conservation of the environment and sustainability, the acceptance by citizens of the need to reduce consumption, reuse products, repair as far as possible and, fundamentally, the action of recycling at the end of its life, facilitates the availability of recycled plastics...

Author(s) : Dr. Michael Pluimer, Sara Stone

The Notched Constant Ligament Stress test (NCLS test, ASTM F2136)[1] is a test method that measures the slow crack growth in High Density Polyethylene. The NCLS test requires a notch on all test specimens to act as a stress concentration at that point so crack propagation can be easily predicted and studied. In...

Author(s) : Michael Pluimer, Christian Herrild, Patrick Vibien

With enhanced interest in a circular economy and the potential use of recycled HDPE within HDPE conduit, a research project was undertaken to investigate the necessary technical requirements when using recycled HDPE. High Density Polyethylene (HDPE) conduit is a durable product designed to protect cables...

Author(s) : Paul J. Freudenthaler, Joerg Fischer, Yi Liu

The European Commission set demandingly high recycling targets which will, when followed, eventually create an increased supply of polypropylene (PP) post-consumer recyclates (PCRs). No regulations currently mandate the use of recycled PP (rPP), so the industry is challenged to explore possibilities to utilize these...

Author(s) : Antonio Rodolfo Jr., Vanderley M. John

Unplasticized (U-PVC) ABNT NBR 5647-2 regular industrial pipe samples, with nominal diameter DN 100, outside diameter 110 mm, nominal wall thickness 7.8 mm, Ca/Zn stabilized, were studied using an essential work of fracture (EWF) approach. These pipe samples were also tested for the degree of gelation via...

Author(s) : Rafael A. García-Muñoz, Rafael Juan, Mónica de la Cruz, Beatriz Paredes, Carlos Domínguez

Plastics are widely used in various industries, resulting in the generation of significant amounts of plastic waste, which causes environmental and economic problems. Although mechanical recycling is the most commonly employed technology, the resulting recyclates often suffer from degradation and contamination. This...

Author(s) : Cindy Bray

For over two decades, the plastics pipe industry in Australia has aimed to recycle the maximum amount of usable plastic pipe and other suitable materials into new plastic pipes through programs such as take-back schemes and providing collection facilities on manufacturing sites. In Australia long-term sustainability...

Author(s) : Tobias Johnsen, Ole Grøndahl Hansen

With a growing global population that will primarily settle in urban areas, more and more agricultural land will be converted into dwellings, roads etc. As the demand for food in 2050 will be 60% greater than today, a conflict between Sustainable Development Goals 2 (Zero Hunger) and 11 (Sustainable Cities and...

Author(s) : Rachel Anderson, Rujul Mehta, Alex Stolarz, Todd Hogan, Stephanie Whited, Joel Wieliczko

Growing worldwide demand for sustainably made irrigation systems has driven the creation of new resins for longer-lasting, more durable, recycle friendly, and cost-effective pipe that can better tolerate extreme conditions year after year. Microirrigation systems deliver vital water and nutrients where they’re needed...

Author(s) : Roland Valk, René Hermkens, Sjoerd Jansma

The use of hydrogen gas as an energy carrier is seen as a key component of the energy transition. This creates new challenges, including in relation to the transport and distribution of this gas. The low-pressure (natural) gas distribution grid in the Netherlands currently consists of 64% PVC and is presumed to be...

Author(s) : A. Marangoni

The competitiveness of plastic pipes vs. non plastic pipes for water and sewer networks relies on both a superior performance to cost ratio and environmental benefits that can be offered to the utility industry, across the whole lifecycle of these networks. In order to help the European pipe network owners in...

Author(s) : Tobias Johnsen

To ensure the highest possible quality of plastic pipes for the Nordic market, the Nordic Poly Mark currently only allows virgin material or own reprocessed material. In order to accelerate the circular plastic pipe economy in the Nordics, a partnership between a PVC pipe waste collection system, a PVC pipe producer...

Author(s) : Jay Parvez, Richard Nichols

All thermoplastic and thermoset pipes must consider the impacts of cyclic loading on overall performance. Since its first use, PVC pipes have been tested for its resilience to such loading. As testing evolved over time, the method to determine cyclic capacity for gasketed PVC pipes has improved. Previously, the...

Author(s) : Karin Jacobson, Daniel Ejdeholm

Plastic pipes often have much better corrosion resistance than metallic pipes and have, in addition, the benefits of low weight and flexibility. Thanks to this, they are often used to convey chemicals. There is, however, still a large potential for a much more extensive use of plastic pipes for this application. The...

Author(s) : Ignacio Muñoz

Society has recently lived few strange and peculiar years, to say the least. COVID impacted personal lives, businesses, industries. And it is undeniable, the big elephant in the room arrived years before COVID and will remain much more: CLIMATE CHANGE. As broad as this topic is, this paper focuses on the impact that...

Author(s) : J. Lahoz

An investigation project was launched in 2020 to clarify the relationships between the processing conditions and the design lifetime of PVC-U 250 pipes. Ca/Zn stabilized pressure pipes were extruded with different processing temperatures and characterized by their DSC B-onset temperature and degree of gelation. Their...

Author(s) : Ludo Debever, Peter Sejersen

The Circular Economy Action Plan is a major building block of Europe’s Green Deal, the European Climate Change strategy. It has far-reaching consequences for the entire EU industrial fabric and its business models. The EU’s transition from a linear to a circular economy aims to reduce on natural resources and pave...

Author(s) : Luciana Oriqui, Mauro Adamo Seabra, Antonio Rodolfo Jr.

The Brazilian PVC pipe industry maintains specific mechanisms of intense and continuous evaluation of the products regularly offered to the market. These programs are carried out by an independent third-party technical entity, within known public rules and based on the best practices of conformity assessment. Their...

Author(s) : Mario Messiha, Jessica Hinczica, Márton Bredàcs, Alwin Huisjes, Florian Arbeiter, Gerald Pinter

BSTRACT Engineering structures, such as operating plastic pipes, are often submitted to unexpected influences that may shorten their lifetime. An increasing understanding about the processes that govern these sudden failures has been attained in the last decades. This has led to a remarkable improvement of pipe...