Our site uses cookies necessary for its proper functioning. To improve your experience, other cookies may be used: you can choose to disable them. This can be changed at any time via the Cookies link at the bottom of the page.


A COST BENEFIT ANALYSIS OF PVC PIPES RECYCLING

 

Plastic Pipes Conference Association # 2021 Amsterdam

A. Marangoni

The quality of infrastructures is a key driver for maximizing the performance of the utilities networks and minimizing the environmental impacts associated with their operation. The water and sewer pipes are key network elements to guarantee a satisfactory service to the citizens. Their end-of-life management is an essential driver for sustainability. In line with the principles of the circular economy, the recycling of pipes after dismantling is an important lever to reduce the overall environmental impacts. Being able to be mechanically recycled several times without any impact on their long term performances, the PVC pipes bring numerous benefits when they are recovered and recycled. The objective of this study is to estimate, in monetary terms, the benefits of PVC pipes recycling, using the Cost Benefit Analysis methodology. The financial analysis considers PVC pipes, as used in water and sewer networks by utilities in Germany and Italy. On one hand, the analysis considers for each country, the costs of recovering, separating and treating PVC pipes at their end of life. On the other hand, the study accounts for the pipe waste disposal savings, the value of the recovered pipe material, the carbon emission savings, the positive economic and employment fall-outs from the recycling business.

Related keywords : PVC pipes, Circular Economy, Recycling, Cost Benefit Analysis.
Please note that the whole article content is available on PPCA website only :

Related papers

2021 Amsterdam : A METHODOLOGY TO DETERMINE CHARPY IMPACT STRENGTH OF NOTHCED SPECIMEN CUT FROM PLASTICS PIPES

Author(s) : Li, Yanjun, Xiang, Aimin, Xu, HaiyunBeijing, Xie, Jianling, Ho, Kinman, Xu, HaiyunBeijing

It is necessary to evaluate the impact resistance of plastics pipes as they have the potential to be damaged by hitting or colliding during storage, transportation and installation. As a well-established test method, the Charpy impact strength of unnotched test pieces cut from thermoplastics pipes is determined...

2021 Amsterdam : ANALYSIS OF PVC AND CPVC BLENDS

Author(s) : Saleem Shakir

Unplasticized formulations based on Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) resins offer technical solution to pressure piping systems that find extensive use in residential and industrial applications. Building upon the desirable properties of the vinyl monomer, the chlorine content of...

2021 Amsterdam : DESIGN OF LARGE DIAMETER BURIED PIPES

Author(s) : Anders Andtbacka, Peter Sejersen

In the late nineties a study of the behavior of buried thermoplastics pipes was carried out. The project had input and participants from both the plastic pipe industry as well as from external organizations. Six external leading experts in the field of pipeline design, not necessarily plastics pipes design, have been...

2021 Amsterdam : DEVELOPMENT OF A RAPID AND INNOVATIVE IN-FACTORY PROCEDURE FOR TESTING THE PERFORMANCES OF PE PIPES CONTAINING VARIOUS PROPORTIONS OF RECYCLED POLYMER MATERIAL

Author(s) : Dominique GUEUGNAUT, Pascal AUSSANT, Romuald BOUAFFRE, Myriam BECHROURI

Concerns regarding the environment and sustainable development have revived interest in the reprocessing and re-use of polymer materials from manufactured objects that have reached the end of their operating life. Within this framework, formal professional agreements have been put in place at global level under the...

2021 Amsterdam : EVALUATION OF MECHANICAL PROPERTIES AND LONG- TERM DURABILITY OF AGED POLYETHYLENE PIPES FOR GAS DISTRIBUTION

Author(s) : Shuhei Nishida, Shintaro Iwasaki, Hidefumi Yamanaka, Takahiro Kasatani

Polyethylene pipelines have been used for natural gas service applications for over 40 years in Japan. It is thought that they will continue to be used widely for many years. Therefore, it is important to confirm the conditions of the existing pipelines being used for the long term. In this study, polyethylene pipes...

2021 Amsterdam : FIRST USE OF PE100-HT CONDUITS FOR ADVANCING THE CONTAINMENT OF UNDERGROUND HIGH VOLTAGE CABLES

Author(s) : Dr. Holger Brüning, Serge Hascoët, Yann Delanne, Didier Nozahic, Jawdat Mansour, José Santana

RTE operates, maintains and develops the French electricity network, including the High and very High Voltage cable lines. Their network is the largest in Europe and includes over 6400 km of underground HV links operated in 2018. The company is modernizing and developing its network by investing 1.5 billion euros per...

2021 Amsterdam : FRACTURE MECHANICS TECHNIQUES IN LARGE DIAMETER PVC PIPES

Author(s) : Antonio Rodolfo Jr., Vanderley M. John

Unplasticised (U-PVC) and modified (M-PVC) pipes used in irrigation and infrastructure applications, outside diameter 326 mm, were evaluated according to various fracture mechanics methodologies, including fracture toughness (stress intensity factor KC and energy release rate GC, both at fracture), essential work of...

2021 Amsterdam : HYDROGEN TRANSPORT IN POLYMER PIPES FOR NATURAL GAS DISTRIBUTION – TEN YEARS OF EXPERIENCE

Author(s) : Stephan Kneck, Henrik Iskov

It has become ever clearer that the resources of natural gas are an energy source, which will be less important in the future due to limitations in use of natural reserves. In order to prepare for the future the gas industry is looking at the alternative fuel gases, one such fuel gas is hydrogen. In order to prepare...

2021 Amsterdam : INNOVATIVE MILLIMETER WAVE TECHNOLOGY FOR MEASURING THE PIPE WALL THICKNESS EARLY IN THE EXTRUSION PROCESS

Author(s) : Christian Schalich

Plastic pipes for infrastructure and building applications are precisely specified with regards to wall thickness and diameter. Pipe manufacturers use different measuring methods in order to ensure the required dimensional accuracy and maintain a constant high quality. This paper introduces a measuring system based on...

2021 Amsterdam : MODELLING THE MIGRATION FROM PVC-U PIPES INTO DRINKING WATER

Author(s) : C. Losher and P.V. Mercea

In the framework of the German Environmental Agency (UBA) requirements of plastic articles in contact with drinking water (KTW-BWGL-guideline), the compliance is verified by comparing so-called “expected concentrations at tap”, C tap , of substances contained in the plastics with specific limits in drinking water...

2021 Amsterdam : MODIFIED PLAIN STRAIN GROOVED TENSILE TEST TO EVALUATE LARGE DIAMETER PE PIPES

Author(s) : Thomas R. Kratochvilla, Patrick Grünbeck, Christoph Bruckner, Raimund Eremiasch, Harald Wilhelm, Mario Vukelja

In the last decades pipe dimensions of extruded PE pipes have reached new orders of size. Today, PE pipes with outer diameters of up to DN/OD 3500 mm are produced and used for pressure pipe applications like seawater intake/discharge, outfall, sewage and industrial process piping systems. To test the long-term...

2021 Amsterdam : MULTILAYER POLYMER PIPES – THE INFLUENCE OF RESIDUAL STRESS ON FATIGUE LIFETIME

Author(s) : Lukas Travnicek, Pavel Hutar, Jan Poduska, Andreas Frank, Florian Arbeiter, Jaroslav Kucera, Jiri Sadilek, Gerald Pinter, Lubos Nahlik

The application of recycled material in pressure piping systems has been considered lately – it was suggested, that the recycled polyethylene could be used as a part of a multilayer pipe together with virgin material. This type of pressure pipes is not availableon the market yet, so their properties can be only...

2021 Amsterdam : MUTUAL RECOGNITION OF THE CERTIFICAT ION SCHEMES IN EUROPE

Author(s) : Horst Stimmelmayr, Peter Sejersen

The voluntary certification scheme for plastic multilayer piping systems for hot and cold drinking water inside buildings is a joint effort of two key European organizations. It was initiated in close cooperation with the Brussels based European trade association of plastic pipe and fittings manufacturers, TEPPFA....

2021 Amsterdam : PLASTIC PIPES FOR WATER DRAINAGE IN RAIL- AND MOTORWAY TUNNELS – A MAJOR CHALLENGE

Author(s) : Florian Arbeiter, Tobias Schachinger, Stefanie Eichinger, Gisbert Rieß, Michael Stur, Michael Steiner, Florian Saliger

Plastic pipes are of outstanding importance for the distribution of potable and process waters, oil and gas, as well as for sewer and waste water disposal. However, plastic pipes are also used in many other technical areas. Especially in European countries with mountainous regions, such as Austria, Switzerland, Italy...

2021 Amsterdam : PVC Pipes TRAINING PACKAGE: 2020 UPDATE!

Author(s) : Sylvie Famelart, Vincent. Stone

In order to deliver to the market reliable and consistent information about PVC and the different PVC pipe solutions, a Training Package was developed a few years ago. The package was made up of a set of standalone PowerPoint slides, providing information on PVC-U and PVC-C pipe systems. Information on both general...

2021 Amsterdam : PVC PIPES WITH SUPERIOR ROOT INTRUSION RESISTANCE

Author(s) : Argnani Claudio, Ing. Gianpaolo Contarini

...Clogging of the pipes can be experienced in sewer systems after a short period of service, due to the intrusion of roots from plants and trees. Plants, and in particular their roots, are attracted by the water flowing inside the pipes. These roots will strain the connections between pipes, in particular the sockets...

2021 Amsterdam : PVC-O DN800: EFFICIENT TRANSFORMATION FROM SOIL TO IRRIGATED LAND

Author(s) : Ignacio Muñoz

“Food is the new oil and gas” is a rather bold statement, but everyday more and more people are concerned about food scarcity. Bringing irrigation to not productive lands will change the lives of the community and if it can be done with a cost effective and the most ecofriendly solution, even better. This case study...

2021 Amsterdam : RECENT DEVELOPMENTS IN INTEGRAL JOINT RESTRAINTS

Author(s) : Guido Quesada

An important breakthrough for belled PVC pipe was made around 2006, when the first versions an integral joint restraint were released, after about two years in development. This type of restraint comprises a casing, usually made of metal such as ductile iron or stainless steel, a rubber seal, and a “C” grip ring,...

2021 Amsterdam : RECYCLING COMMITMENT OF THE EUROPEAN PLASTIC PIPE INDUSTRY

Author(s) : Ludo Debever, Peter Sejersen

The European Plastics Strategy is a priority for the European Union. Recycling more post- consumer plastics (PCRs) is paramount. That is why the Circular Plastics Alliance has been established. The alliance gathers public and private stakeholders in the plastics value chains to promote voluntary actions and...

2021 Amsterdam : SLOW CRACK GROWTH RESISTANCE OF REPROCESSED PVC

Author(s) : Andreas Frank, Mario Messiha, Günter Dreiling, Norbert Schuler, Jens-Martin Storheil, Erwin Mayrbäurl, Stuart Ramella, Frank Krause, Rudi Berning, Philippe Gabriëls, Alpay Aydemir, Thomas Koch, Florian Arbeiter, Gerald Pinter

The Cyclic Cracked Round Bar (CRB) Test has been applied to study the slow crack growth (SCG) resistance of virgin, recycled, and reprocessed PVC-U. This fracture mechanical test allows a quick ranking of the SCG resistance of PVC-U. A clear correlation between the K-value and the SCG resistance has been elaborated....

Members of the Association

BOREALISBOROUGEFormosa Plastics CorporationHanwha TotalEnergiesINEOS O&PIRPCKorea Petrochemical IND. Co., LTD (KPIC)LyondellBasellORLEN UnipetrolPetroChina Dushanzi Petrochemical CompanyPRIME POLYMERSABICSCG Chemicals & Thai PolyethyleneSinopecTASNEE