Plastic Pipes Conference Association # 2023 Lake Buena Vista
Federico Muñoz
Following the recent approval of European Standards series EN 1555 for Polyethylene piping systems for the supply of gaseous fuels which introduces the PE100RC, a new material with enhanced resistance to Slow Crack Growth (SCG) and anticipating the imminent revision of European Standard series EN 12201 for Polyethylene piping systems for water supply which also introduces the same PE grade, we noticed the need to introduce in Spain/LATAM the new tests required to evaluate such materials from granulate, pipe or fitting.
A close agreement with Laboratorio de Tecnología de Polímeros (LATEP) of Rey Juan Carlos University in Móstoles (Madrid) makes possible to carry out the complete package of accelerated tests required to check the resistance to Slow Crack Growth of both PE100RC grades and the pipes/fittings manufactured with them in a single testing hub with clear benefits for our customers.
Accelerated Full Notch Creep Test, Strain Hardening Test, Crack Round Bar Test and Accelerated Notched Pipe Test could be performed now in Spain after a process initiated in 2020. Ongoing SHT accreditation will be followed with remaining ones in the next times.
Related papers
Author(s) : Rafael A. García-Muñoz, Rafael Juan, Mónica de la Cruz, Beatriz Paredes, Carlos Domínguez
Plastics are widely used in various industries, resulting in the generation of significant amounts of plastic waste, which causes environmental and economic problems. Although mechanical recycling is the most commonly employed technology, the resulting recyclates often suffer from degradation and contamination. This...
Author(s) : Yanlei Hu, Jin Sun
Slow crack growth is the main reason for brittle failure of polyethylene pipes. At present, the traditional slow crack growth test generally has many problems, such as too long test time, using chemical reagents that pollute the environment, poor reproducibility, etc., which limit the accurate evaluation of the slow...
Author(s) : Carlos Domínguez, Predrag Micic, Rafael Juan, Nuria Robledo, Rafael A. García-Muñoz
Slow Crack Growth (SCG) resistance is the main property that must be controlled for assessing the long-term performance on polyethylene resins used for pipe application. The latest generation of bimodal and multimodal ethylene-α-olefin copolymers with exceptional balance of mechanical properties and processability...
Author(s) : Ernst van der Stok
For PE 100-RC, two tests are still under development for pipes: the point load test (PLT) and the accelerated notch pipe test (aNPT). The PLT was developed by a project group consisting of manufacturers and end users. The PLT determines the resistance to point loads as they can occur in practice. An earlier study...
Author(s) : Thomas R. Kratochvilla, Raimund Eremiasch, Christoph Bruckner
In the last years effort has been made to develop and standardise new accelerated test methods to evaluate PE 100-RC materials in short times in form of test bars. The two most important developments, the cracked round bar test (CRB test) and the strain hardening test (SH test) were published as final ISO standards...
Author(s) : Pavel Hutar, Jan Poduska, Pavol Dlhy, Andreas Frank, Jaroslav Kucera, Jiri Sadilek, Gerald Pinter, Lubos Nahlik
This paper investigates possible use of recycled material as a part of a multilayer polyethylene pressure pipe system. Crack propagation in different configurations is simulated. Lifetimes of pipes containing recycled material are calculated. Results are compared with lifetimes of pipes made of virgin...
Author(s) : Mark Yu, Dongyu Fang, Peck Tze Kang, Amos Tay , Fan Liu
Large diameter pipe was introduced in refineries and petrochemical plant, desalination plant and power plant for water intake and sea out fall in the past decade. PE100-RC material was selectedfor its excellent balance of superior bi-modal stress crack resistance and consistent high stiffness modulus. Under the...
Author(s) : Norbert Jansen, Albert Lueghamer
Demand for polyethylene (PE) pipe continues to grow on a global basis. The performance properties of this tough, durable piping material are widely recognized by the engineering and design community on a worldwide scale and the range of applications expands. The evolutionary trend in PE piping systems has been very...
Author(s) : Ernst van der Stok, Frans Scholten
Samples machined directly from pipe show that orientation has a large influence on the strain hardening modulus. No effects arising as a result of residual stresses were found. Samples machined in the axial direction from a hydrostatic pressurised pipe showed no effect as a result of this mechanical degradation. For...
Author(s) : Suleyman Deveci, Dongyu Fang
Latest developments in polyethylene production (hexene co-monomer and bi-modality) have increased the material’s Slow Crack Growth (SCG) properties, which is a time dependent brittle type failure under low stress levels and one of the most important long term properties of pipe grade polyethylene materials. Despite...
Author(s) : G. Pinter, F. Arbeiter, A. Frank
The cyclic cracked round bar test has recently been added as a full-fledged ISO standard (ISO 18489) for comparison of polyethylene pipe grade materials’ slow crack growth resistance. However, possibilities of this test are yet far from being exhausted. Seeing, that polyethylene is only used in approximately 30% of...
Author(s) : Carlos Domínguez, Nuria Robledo, Rafael A. García-Muñoz
With the last advances and improvements in the polyethylene resins used for pipe application, new methods for evaluating long-term mechanical properties need to be introduced. Standard PENT and FNCT tests needs more than one year for characterizing the new PE100RC grades with the consequent thermal ageing problems....
Author(s) : Carl F. Baker
The performance of HDPE resins with regards to slow crack growth has increased dramatically over the past two decades. The most common test method for pipe products is ASTM F1473, Standard test Method for Notch Tensile Test to measure the resistance to Slow Crack Growth of Polyethylene Pipes and Resins (PENT)....
Members of the Association
