Plastic Pipes Conference Association # 2021 Amsterdam
Hua Ye, Sun Jin, Wei Ruoqi
As a safe, clean, low-carbon and reliable energy source, nuclear power, together with hydropower and coal power, constitutes the three pillars of the world's energy supply and play an important role in the world's energy structure.With the strong support of national policies, China's nuclear energy has entered a new period of large-scale development. Its scientific and technological innovations, including third-generation nuclear power technology, have reached the international advanced level, and it is gradually becoming the world's nuclear power industry center. The potential for nuclear power is enormous.
The application of nuclear power polyethylene pressure piping in other countries has only been for ten years due to the extremely strict safety requirements of nuclear power, and it is still in the initial stage and discussion stage in China. However, it should be seen that China has been able to produce qualified large-diameter and thick-wall polyethylene pressure piping for nuclear power. This paper introduces the progress of test and standard of polyethylene pressure piping for nuclear power and the application status and prospect of polyethylene pressure piping for nuclear power in China.
Related papers
Author(s) : Dr. Henning Stieglitz
Urbanization and the increasing effects of climate change have meant the supply of fresh water and the disposal of wastewater, have become increasingly important in recent years. It is foreseeable that this demand will continue and intensify. In this context, plastic pipe plays a major role due to its unique...
Author(s) : Ajay Taraiya, Peter Degenhart, Mark Boerakker
In PPXX, a technology was presented for the first time that could bi-axially orient polyolefin pipes. With this technology, it is possible to prepare pipes that have a performance far beyond the standard ones. One approach to achieving this performance is via a continuous in-line process. To optimize the in-line...
Author(s) : Joe Babcanec, P.E., Issam Khoury, Ph.D, P.E., Shad Sargand,
The use of corrugated HDPE and PP pipe for gravity flow storm sewers is a growing trend throughout the United States. Many of these drainage pipes are buried in shallow cover conditions under roads with heavy traffic. It is well established that thermoplastic pipe installations under shallow cover respond differently...
Author(s) : Shawn R Coombs, PE
Pipelines through embankments should be designed to withstand extreme weather-related events and everyday stressors. As extreme weather-related events are on the rise because of climate change, it is important to ensure proper design, construction, and inspection practices are understood and executed. This paper...
Author(s) : Anders Andtbacka, Peter Sejersen
In March 1999, a project report on the performance of buried Thermoplastics pipes was published by TEPPFA /1/. In the report, deflection and strain data on buried pipes were analyzed and compared with calculation results from several well-known static calculation models in use in Europe. Pipes were installed to...
Author(s) : Dr. Michael Pluimer, Sara Stone
The Notched Constant Ligament Stress test (NCLS test, ASTM F2136)[1] is a test method that measures the slow crack growth in High Density Polyethylene. The NCLS test requires a notch on all test specimens to act as a stress concentration at that point so crack propagation can be easily predicted and studied. In...
Author(s) : Ernst van der Stok, Mirko Wenzel, Thomas Kratochvilla, Kurt Engelsing, Werner Weßing, Britta Gerets
It has not been possible to derive an accelerated procedure for the Point Load Test (PLT) as a pipe test before now. Further research and testing were therefore needed to establish appropriate requirements for standards including EN 1555-1 to rule out uncertainty in the market. The PLT is a central product test for...
Author(s) : Sunwoong Choi, Robert Stakenborghs , Pyeongan Lee, Byoungho Choi
This work developed a hydro-axial tension (HAT) test as a whole pipe axial tensile test and applied to evaluate the polyethylene (PE) pipe and fusion joints containing various flaws. HAT test was designed to utilize hydrostatic pressure to cause axial tension in pipes. The experimental and numerical analysis was...
Author(s) : Norbert Jansen
A practical requirement of temperature resistance of minimum 50 years at 70°C was established for the extra high voltage (EHV) corridor projects in Germany. Experts have debated what tests are best suited to prove the suitability of a pipe resin for cable protection pipes which may be installed hastily and under...
Author(s) : Aisha Khaleel, Suleyman Deveci, Sulistiyanto Nugroho, Fatima AlHameli
The use of polyethylene pipes in transportation networks of pressurized water and gas have shown superb performance over the history. High density, high-molecular-weight, and bi-modal polyethylene materials, known as PE80, PE100 and PE100RC, have successfully served the market for many years in standard applications....
Author(s) : Jessica Hinczica, Mario Messiha, Florian Arbeiter, Gerald Pinter
In Europe, only 1.8 million tons of recycled material is processed in new products within the building and construction sector [1]. Recyclates and blends of recyclates with virgin materials are already used for different products in the plastic pipe industry, such as cable trays, or storm water management...
Author(s) : Jie Wu, Yushan Hu, Todd Hogan
Recycling of plastic materials is key to demonstrating that these high value materials are much more than a waste stream and a key component of a sustainable future. The plastic pipe market effectively utilizes in-plant recycle systems where standards and codes allow processors to recapture the value of these...
Author(s) : Kevin White, Shad Sargand
The current standard of practice for the installation of agricultural mains is in accordance with ASTM F449, Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control. ASTM F449 has several limitations. Currently, the allowable maximum height of...
Author(s) : Rafael A. García-Muñoz, Rafael Juan, Mónica de la Cruz, Beatriz Paredes, Carlos Domínguez
Plastics are widely used in various industries, resulting in the generation of significant amounts of plastic waste, which causes environmental and economic problems. Although mechanical recycling is the most commonly employed technology, the resulting recyclates often suffer from degradation and contamination. This...
Author(s) : Carine Lacroix, Philippe Louvel, Danielle Mark, Dominique Gueugnaut
A test program was carried out on two Polyamide resins, Polyamide 11 (PA11) and Polyamide 12 (PA12), both certified for gas networks. Polyamide’s advantage lies in its implementation, similar to that of polyethylene, and its properties allowing it to operate at up to 18 bar for gas, all other conditions being equal....
Author(s) : Shane Schuessler, Richard Coombs, Mohamed Hageb, Abdullah Saber, Grigorios Vigellis, Chandra Basavaraju
Bordered by Rwanda and the Democratic Republic of Congo sits Lake Kivu, an African Great Lake formed along the East African Rift. Lake Kivu is one of the world’s deepest freshwater lakes and contains enormous quantities of dissolved carbon dioxide and methane gas held at depths greater than 1100 feet (350 meters)....
Author(s) : Yanlei Hu, Jin Sun
Slow crack growth is the main reason for brittle failure of polyethylene pipes. At present, the traditional slow crack growth test generally has many problems, such as too long test time, using chemical reagents that pollute the environment, poor reproducibility, etc., which limit the accurate evaluation of the slow...
Author(s) : Rachel Anderson, Rujul Mehta, Alex Stolarz, Todd Hogan, Stephanie Whited, Joel Wieliczko
Growing worldwide demand for sustainably made irrigation systems has driven the creation of new resins for longer-lasting, more durable, recycle friendly, and cost-effective pipe that can better tolerate extreme conditions year after year. Microirrigation systems deliver vital water and nutrients where they’re needed...
Author(s) : Carlos Domínguez, Predrag Micic, Rafael Juan, Nuria Robledo, Rafael A. García-Muñoz
Slow Crack Growth (SCG) resistance is the main property that must be controlled for assessing the long-term performance on polyethylene resins used for pipe application. The latest generation of bimodal and multimodal ethylene-α-olefin copolymers with exceptional balance of mechanical properties and processability...
Author(s) : Ernst van der Stok, Nadia Luijsterburg-Vleugels
The latest generation of polyethylene grades (PE 100-RC and PE 4710 PLUS) have an increased resistance to slow crack growth. Such cracks can be initiated by either a scratch during installation or a rock indentation during use. The Accelerated Notch Pipe Test (ANPT) was standardized in ISO 13479 in 2022 to allow the...
Members of the Association
